-
×
Bearings
10 × $0.01 -
×
Pulley Kit for Crusader 7.4L 454, 502 8.2L, Big Block Marine Engines 22652 3 Pulleys
2 × $229.95 -
×
Hose for Crusader From Raw Water Pump To Transmission Oil Cooler 97310 with Clamps
4 × $59.95 -
×
Bearing for Early Reduction 1.52:1, 1.91:1, 2.10:1 Ratios. Only Fits Models with Seal Holder
8 × $249.95 -
×
Pulley Crankshaft for Crusader Big Block Drives Circulating Pump and Alternator
3 × $24.95 -
×
Pulley Kit for Crusader Big Block 7.4 454 8.2 502 Engines Replaces 22652
3 × $219.95 -
×
Reverse Adapter Bearing 4840D
9 × $19.95 -
×
Bearing Rear Reduction 2.57:1 2.91:1 and V-Drive
10 × $249.95 -
×
Bearing for Velvet Drive 71C 1004 1013 1017 Forward Piston Housing Replaces B107A
10 × $18.95 -
×
Gasket Seal Kit HBW5-50-100 WITH THRUST WASHERS
4 × $74.95 -
×
Rebuild Kit Velvet Drive V-Drive 2002 Series
3 × $749.95 -
×
Main Case Bearing for All Ratios EXCEPT 1.52:1 Replaces 1000-130-018
6 × $69.95 -
×
Bearings
2 × $0.01
-
×
Crusader Heat Exchanger to Circulating Water Pump Hose Replaces 98014
2 × $89.95 -
×
Bearings
1 × $0.01
$25.95
Seal Output for Hurth Marine HSW 630 V Drive Transmissions 105-113 444-070
13 in stock
Seal for Output Shaft on Hurth V Drive Marine Transmissions
Fits the following models:
HSW 630 V Drive Transmissions
Outside Diameter 110MM
This seal is closest to the Shaft Coupling and is the larger of the two output shaft seals.
Replaces Hurth part #s: 105-113, 444-070
Mercruiser 26-811956
Alto 316408
| Weight | 3.2 lbs |
|---|
Related products