$7.95
Pump Bolt Kit
100 in stock
Pump Bolt Kit. 4 Pieces. Never use lock washers on these bolts. The are an odd length 2-3/8 inch. If you use bolts that are too long the pump will not be pulled in enough and will not work correctly.
4 Piece Kit
Bearings
Kit Overhaul for Hurth Marine HSW 800 Reduction Series Transmissions
Master rebuild 8 Bronze plates & 8 Steel Plates gaskets seals
Bearings
Master rebuild plates gaskets seals Thrust Washer
ZFPK85L- Plate Kit
Master rebuild plates gaskets seals Thrust Washer
ZFP85SL- Steel Plate
ZFP85BL - Bronze Plate
Rebuild Kit Velvet Drive V-Drive 2002 Series
Master rebuild plates gaskets seals Thrust Washer Bearings
Gasket Seal Kit Hurth HBW10-150 ZF12M and ZF15M
Reverse Adapter Bearing 4840D
Main Case Bearing for All Ratios EXCEPT 1.52:1 Replaces 1000-130-018
Bearings
Bearing Rear Reduction 2.57:1 2.91:1 and V-Drive
Pulley Kit for Crusader Big Block 7.4 454 8.2 502 Engines Replaces 22652
Gasket Seal Kit HBW10-150 WITH THRUST WASHERS
Hurth HSW800 HW800A ZF80 ZF80A ZF85 ZF85A Rebuild Kit Gaskets Seals Plates Filter
Pulley for Crusader Raw Water Pump V-Belt 97952 with Bolts
Bearings
Kit Overhaul for Hurth Marine HSW 800 Reduction Series Transmissions
Master rebuild 8 Bronze plates & 8 Steel Plates gaskets seals
Bearings
Master rebuild plates gaskets seals Thrust Washer
ZFPK85L- Plate Kit
Master rebuild plates gaskets seals Thrust Washer
ZFP85SL- Steel Plate
ZFP85BL - Bronze Plate
Rebuild Kit Velvet Drive V-Drive 2002 Series
Master rebuild plates gaskets seals Thrust Washer Bearings
Gasket Seal Kit Hurth HBW10-150 ZF12M and ZF15M
Reverse Adapter Bearing 4840D
Main Case Bearing for All Ratios EXCEPT 1.52:1 Replaces 1000-130-018
Bearings
Bearing Rear Reduction 2.57:1 2.91:1 and V-Drive
Pulley Kit for Crusader Big Block 7.4 454 8.2 502 Engines Replaces 22652
Gasket Seal Kit HBW10-150 WITH THRUST WASHERS
Hurth HSW800 HW800A ZF80 ZF80A ZF85 ZF85A Rebuild Kit Gaskets Seals Plates Filter
Pulley for Crusader Raw Water Pump V-Belt 97952 with Bolts
$7.95
Pump Bolt Kit
100 in stock
Pump Bolt Kit. 4 Pieces. Never use lock washers on these bolts. The are an odd length 2-3/8 inch. If you use bolts that are too long the pump will not be pulled in enough and will not work correctly.
4 Piece Kit
